|
Input/Output Feature
|
Rated input voltage
|
200V voltage class: DC-200 ~ 400V, AC single/three-phase 220V
|
|
|
400V voltage class: 3-phase 380VAC voltage, continuous
fluctuation ± 10%, transient fluctuation -15% ~ + 10%
|
|
|
Rated input
frequency
|
50Hz/60Hz±5%
|
|
|
Output Voltage
|
3-phase: 0 ~ rated input voltage, error less than ± 3%
|
|
|
Output frequency
|
0.00 ~ 600.00Hz, 0.01Hz
|
|
|
Overload capacity
|
150% 1 minute;180% 10 second;200% 0.5 second
|
|
|
Operation Control Feature
|
Control Mode
|
V/f control
PG-less vector control (SVC)
|
|
|
Speed Control
Range
|
1:100 (V/f)
1:200 (SVC)
|
|
|
Speed Control
Accuracy
|
± 0.5% (V/f control)
±0.2% (SVC)
|
|
|
Velocity fluctuation
|
±0.3% (SVC)
|
|
|
Torque Response
|
<10ms(SVC)
|
|
|
Starting Torque
|
0.5Hz:180%(V/f?SVC)
0.25Hz:180%(SVC)
|
|
|
Basic function
|
V/F curve
|
Three modes: linear type;Multipoint type;N-th power V/F curve
|
|
|
V/F separation
|
Two modes: total separation and semi-separation
|
|
|
Acceleration
/Deceleratio n Curve
|
Linear or S curve acceleration and deceleration mode;Four acceleration and deceleration times;Acceleration and deceleration time range 0.0 ~ 60000s
|
|
|
DC braking
|
DC braking frequency: 0.00Hz ~ maximum frequency, braking time: 0.0s ~ 30.0s, braking action current value: 0.0% ~ 100.0%
|
|
|
Inching control
|
Inching frequency range: 0.00Hz ~ 50.00Hz;Inching acceleration and deceleration time 0.0s ~ 60000s
|
|
|
|
Simple PLC, multi-speed operation
|
Up to 16-speed operation via built-in PLC or control terminal
|
|
|
Built-in PID
|
Closed-loop control system capable of realize process control conveniently
|
|
|
Automatic voltage regulation (AVR)
Overvoltage and overspeed loss control Fast current limiting
function
|
When the grid voltage changes, it can automatically keep the output voltage constant
|
|
|
Automatically limits current and voltage during operation to prevent frequent overcurrent and overvoltage trip
|
|
|
Minimize overcurrent faults and protect the normal operation of the product
|
|
|
Torque limitation and control
|
Automatic torque limit during operation to prevent frequent overcurrent trip
|
|
|
Input terminal
|
Six switching value input terminals, of which X6 can be used as high-speed pulse input. Support active open collector NPN, PNP and dry contact input mode, two analog input terminals, one for voltage and current input optional, one for voltage input
|
|
|
Output Terminal
|
A high-speed pulse output terminal, a square wave signal output of 0-50kHz, a switching value output terminal, a group of relay output terminals,
|
|
|
An analog output terminal, voltage and current output optional,
can set the frequency, output frequency and other physical output
|
|
|
Featured function
|
All kinds of main and auxiliary setting and switching, speed search, multiple acceleration and deceleration curve selection, brake control, can support up to 16 speed operation (two speed support flexible frequency setting mode), Swing frequency control operation, Fixed length control, Counting function, Overexcitation braking, Overvoltage stall, Undervoltage stall, Restart after power
failure, Jump frequency, Frequency binding, Free switching of four-stage
|
|
|
|
acceleration and deceleration time, Motor temperature protection, Flexible fan control, Process PID control, Simple PLC, Droop control, Parameter identification, Field weakening control, High-precision torque limit, V/VF Separation control
|
|
|
Protection Function
|
Short circuit detection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection and overload protection of electrified motor
|
|
|
Environment
|
Place of
use
|
Indoor, not direct sunlight, no dust, corrosive gases, flammable
gases, oil mist, water vapor, dripping water or salt and so on
|
|
|
Altitude
above sea level
|
For derating above 1000m, the rated output current will be derated by 1% for every 100m
|
|
|
Ambient temperatur e
|
-10 ? ~ 50 ?, 50 ? ~ 60 ? for derating, 1 ? higher, 1% lower rated output current
|
|
|
Humidity
|
5 ~ 95%, condensation is not allowed
|
|
|
Vibration
|
Less than 5.9 m/S2 (0.6g)
|
|
|
Storage Temperatu
re
|
-20??+60?
|
|
|
Other
|
Mounting
method
|
Wall-mounted
|
|
|
Degree of
protection
|
IP20
|
|
|
Cooling Mode
|
Forced Air Cooling
|
|
